angle of inclination
英 [ˈæŋɡl ɒv ˌɪnklɪˈneɪʃn]
美 [ˈæŋɡl əv ˌɪnklɪˈneɪʃn]
倾斜角；磁倾角
英英释义
noun
- (geometry) the angle formed by the x-axis and a given line (measured counterclockwise from the positive half of the x-axis)
双语例句
- A surveying instrument consisting of a spirit level and a sighting tube; used to measure the angle of inclination of a line from the observer to the target.
由一个水平仪和一个观测管组成的测量工具；用来测量从观测者到目标的直线的倾斜角。 - This article will present the rational optimization of the hoisted point on a whole stand bar tower of single point hoisting, the length of the pole, and the angle of inclination to find its optimum association.
采用单纯形法优选抱杆参数，对单点吊整立杆塔的吊点位置、抱杆的长度、倾角和固定钢绳绳角进行合理的优化，从而找到了最优组合。 - Experimental results show that by using an optimal angle of inclination energy losses can be reduced and outlet flow fields improved.
实验结果表明：采用最佳倾斜角叶片能降低叶栅能量损失和改善叶栅出口流场的气动性能。 - In this paper, the license plate number of a wide range of tilt angle calculation means to conduct a large number of experiments, the final choice point by calculating the characters to determine the angle of inclination of the plate.
本文研究了多种计算车牌号倾斜角的方法，进行了大量的实验，最终选择通过计算字符中心点来确定车牌的倾斜角。 - It can be see from the measured data that the deviation angle of inclination is about 1 40 °, slightly exceeding the permitted value.
现场检测数据显示，该抗风柱基础施工偏差略大于允许值，连接抗风柱的垫板约有140°倾斜。 - Results The point A moved forward, and the angle of inclination of maxillary incisor increased.
结果A点前移，上前牙唇向倾斜； - Practice of using raise boring in excavation of guide hole for shaft with large angle of inclination Construction Technology of Long Curved Hoisting Transportation System in Steep Inclined Shafts
反井钻开挖大倾角斜井导孔的工程实践大倾角斜井长曲线提升机运输施工技术 - The results of the analysis could play a important role in prediction of herringbone buckling and its angle of inclination on strip rolling line.
研究结果可为板带材轧制过程中倾斜浪及其倾斜角度的预测和控制提供理论依据。 - We quantitatively analyze the casing damage, present the deformation of casing with the change of relative position of stratum and study the angle of inclination of stratum, the pressure of stratum, the size of soaked area and the hydration of marl.
以地层的相对错动表示套损变形情况，研究了地层倾角、地层压力、浸水域大小和泥岩水化情况改变对套损的影响。 - The trainer can provide learners the simulant melting rate of electrode, check up whether the moving rate of electrode and the angle of inclination of electrode are in the ranges set in advance.
该装置能给学员提供焊条摸拟熔化速率，能检测焊条移动速率、焊条倾角、焊条与工件间的距离是否在予先设定的范围内。